Customer Service  877.421.9490   FAX 1.877.421.3158    Local 414.421.9490
Home Page | About Us | All Products | Bollards| INGRESS'R® | Contact Us | Press

Square and Round Bollards
"Best Bollards in the Business!"

say our Customers AND OUR COMPETITORS!


Contact Customer Service for Custom-Stock Bollard
Production Schedule
Downloadable Design Ideas in PDF Format
Square Bollards Anodized Finish
Round Bollards Powder Coatings
Round Bollard Check List PVDF Paint Finishing  
Rectangular Bollard Check List Squard Bollard Check List
Triangular Bollard Check List  
BOLLARD INSTALLATION
Set All Margins to 0 when printing spec sheets
6" Square 
Surface Mount
CLICK for
printable specs
6" Square
Inground

CLICK
for
printable specs
6" Round
xSurface Mount
CLICK
for
printable specs

6" Round
Inground
CLICK for
printable specs

       
6" Square Stainless
w/Stainless Hood
for Two Devices
Square Dark Bronze w/card reader and Stainless INGRESS’R
Light Bronze
Anodized

(Square Only)
AINS 6” Diameter Stainless (Angled Top with Recessed Switch Mount)
US32 mirror stainless with reveals and recess for flat devices.
Painted Domed Aluminum with reveals and recess for flat devices
Triangle Bollard
with Reveals

Fully Custom Design/Special Project

Click here to view more bollard photos

FEATURES:
6 inch (152 mm) Square and Round
Mortised, removable cap of textured marine board. Secure transmitter mounting strap allows an      unobstructed wave pattern (standard on all bollards with this cap)
Standard architectural finishes
Standard switch location is 36" (965 mm) from finished floor (Conforms to all 50 states' guidelines)
Single gang switch prep accommodates all but jamb switches

Standard black cap including
transmitter mounting strap


ROUND BOLLARDS:
Utilize Wikk's specially curved and engraved 6" x 6" switch.

EXCLUSIVELY FROM WIKK!

6" x 6" Curved Switch

Adapter Cuff for 4-1/2" Square Switch
Catalog No.
Legend (Blue Infill)
Catalog No. BP4X4 ADT RFBLK
6C-3 WR
PUSH TO OPEN ECONOMICAL! Allows use of 4.5" x 4.5" switch on round bollard
Textured black ABS material
1-5/8" projection from bollard, plus switch
Switch mounts through cuff to 1-gang prep
Available in US32D and US32  
6C-5 WR
Engraved and Weather Resistant
US32D standard material/finish (others available)
Custom engraving upon request
  

Ordering Key & Considerations
Standard models normally stocked for same-day shipping.
Custom lead time can be as short as 1-2 weeks, or 3-5 weeks depending on design. Consult factory.

Surface-mount standard posts are 42” (1067 mm) high and include superior aluminum anchoring base and anchors; single-gang prep at 36” (914 mm) AFF.
In-ground standard posts are 54” high including 12” recess (1372 mm); single-gang prep at 36” (914 mm) AFF.

Shape
BPR = round
BPS = square

Installation options
SM = surface mount: standard posts are 42” (1067 mm) high; includes superior aluminum anchoring base, anchors, and instructions
IG = in-ground: standard posts are 54” (1372 mm) high, including 1 foot (305 mm) recess and instructions

Architectural Materials & Finishes

Aluminum:
Extruded; nominal 1/8” [4mm] wall thickness, square: 1/64” corner radius
• Superior anodized finishes and durable good looks to complement standard architectural openings
Finishes: Clear Anodized, Dark Bronze Anodized, Black Anodized, Mill finish for painting; Light Bronze Anodized for square bollard only
Tube Stainless Steel: Welded type 304; .120 [3mm] wall thickness
• Exceptionally sturdy in US32D Satin or US32 Mirror finishes to complement prestigious architectural openings
• Square: 3/16” corner radius
• 316 alloy available as special order
Brass Clad Aluminum (Square only): Nominal 18/19 gauge sheet metal over standard Aluminum extrusion, 9/64 corner radius
• US4 Satin or US3 Mirror finishes to complement prestigious architectural openings

Overall height

Can be shorter or taller than standard height

Number of preps, their locations, and styles
Add card readers, intercoms, multiple switches, preps for narrow switches, and more
Square bollard: Switches and devices mount directly to post
Round bollard: Curved switch (6C series) mounts directly to post. Use Adapter Cuff for additional items or switch styles; Stainless and Mill aluminum (for painted finishes) round bollards can be modified with recessed surfaces to accommodate flat devices.

Cap style & finish
• Flat top: Standard black removable (allows RF transmission), Stainless or Brass removable
Angled top: Welded Stainless on Stainless, welded Aluminum on Mill aluminum for painted finishes, custom black removable (allows RF transmission)
• Dome: Round only, welded to Stainless or Mill aluminum for painted finishes

Additional Options (consult factory)
• Non-standard dimensions
• Painted finish supplied by Wikk (Kynar-type or powdercoat)
• Additional anchoring, i.e. external base plate, 7” anchors
• 6” x 12” Stainless or Brass Clad bollards

Back to Top


Wikk Designs and Manufactures AccessAbility™ Door Activation Products
© COPYRIGHT
2009 by WIKK INDUSTRIES INC, &  WEB CENTERS OF AMERICA, INC.